JMT DIY Drone Kit Hex Rotor Hexa Copter RTF W/ F550 Flame Wheel Kit + KK 2.3 Controller + ESC Motor Weld&debug Battery TX RX

Price: [price_with_discount]
(as of [price_update_date] – Details)

[ad_1]
Tips?
Our Technicist has been weld and debug for the F550 Frame kit with KKmulticopter Flight Controller Board,ESC,Receiver,Motor.
It can help Beginner to get and play easier.These Parts has been tested and connect and make sure in the best condition before package.
Of course,the Frame kit and some parts also need buyer’s assembly.Hope understand.
Any question,please contact,Thanks for your interest in advance.

Introduction: 
FlameWheel F550 (Notice Not Made by DJI) is a multi-rotor designed for all pilots for fun or AP, it can achieve hovering, cruising, even rolling and other flight elements. This combo we provide KKmulticopter 2012 flight controller with 2.3 firmware,it also can suprisingly have this effect.
It can be applied for entertainment, aerial photography, FPV and other aeromodelling activities.New design PCB board speical for F550,support standard 50mm controller board like MK,KK, FF,MWC.

Specifications: 
– Model Flame Wheel 550 (F550)
– Weight:  about 1106gram(not include battery)
– Diagonal Wheelbase 550mm *1
– Propeller 10 ×4.5in * 3-pairs
– Brushless Motor A22122 13T *6
– Brushless ESC 30A*6
– KKMulticopter V2.3 Circuit board Flight Controller With
– FMT 11.1V 3300Mah 25C Lipo battery *1
– RadioLink T8FB 2.4G 8Ch Transmitter and Receiver *1
– Balance charger + Adapter *1 set
 (If you have request for the plug of the adapter,please leave message or contact us before purchase,or we will ship according to common sense,the adapter’s style sometimes is different from the picture shows,function same,if you mind,please contact us before purchase,it’s my pleasure to serve you!)
– Connecting Plug *1 bag
– It can be applied for entertainment, aerial photography, FPV and other aeromodelling activities.New design PCB board speical for F550,support standard 50mm controller board like MK,KK, FF,MWC.
– Plate board with build-in KKmulticopter control board!
– Weld and debug For the main Plate with KK controller,esc,motor,Receiver
– Diagonal Wheelbase 550mm

[ad_2]